RENEGADE -
ITEM CODE:BH66.
INSTRUCTION MANUAL
27
1. Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2. Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3. Double check the balance of the
airplane.
4. Check the control surface.
5. Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6. Properly balance the propeller.
PRE-FLIGHT CHECK.
We wish you many safe and enjoy-
able flights with your RENEGADE.
1. We highly recommend setting up a plane
using the control throws listed.
2. The control throws should be meas-
ured at the widest point of each control sur-
face.
3. Check to be sure the control surfaces
move in the correct directions.
CONTROL THROWS
.
Ailerons : 10mm up 10mm down
Elevator : 10mm up 10mm down
Rudder : 15mm right 15mm left
Aileron Control
10
10
15
15
