RENEGADE -
ITEM CODE:BH66
Instruction Manual
16
Epoxy glue
6. After the epoxy has fully cured, remove
the masking tape or T-pins used to hold the
stabilizer in place and carefully inspect the
glue joints. Use more epoxy to fill in any
gaps that were not filled previously and
clean up the excess using a paper towel and
rubbing alcohol.
C/A glue
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
ELEVATOR CONTROL HORN INSTALLA-
TION.
Remove
covering
3x35mm.
M3 lock nut.
Nilon control clasp.
Drill a hole
6 mm diameter
Mark point
