Black Horse Model Mustang P51, Инструкция по эксплуатации

Страница: 7 / 34

7
MUSTANG P51 -
Item code: BH33
.
Instruction Manual
 6. Insert the 90 degree bend down through
the hole in the servo arm. Install one nylon
snap keeper over the wire to secure it to the
arm. Install the servo arm retaining screw and
remove the masking tape from the aileron.
 4. Locate one nylon servo arm, and using
wire cutters,remove all but one of the arms.
Using a 2mm drill bit, enlarge the third hole
out from the center of the arm to accommo-
date the aileron pushrod wire.
 5. Using pliers, carefully make a 90 degree
bend down at the mark made. Cut off the ex-
cess wire, leaving about 4mm beyond the
bend.
Bend and cut
M2 clevis.
M2 lock nut.
Snap keeper.
Aileron servo
Aileron