Black Horse Model Mustang P51, Инструкция по эксплуатации

Страница: 4 / 34

4
MUSTANG P51 -
Item code: BH33
.
Instruction Manual

 1) Install the rubber grommets and brass
eyelets onto the aileron servos.

4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.

3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Bottom of wing

2) Using a modeling knife, remove the cov-
ering at possition show below.
Temporary pin to
keep hinge centered.
Cut the covering
away from the slot.
Bottom of wing.
Remove the covering.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
INSTALLING THE AILERON SERVOS.
2. Wheels.
8.Tail gear set.
7. Fuel tank.
4. Spinner
3. Air retract main gear.
1.Door mounting wheel.
5. Plastic part of wing
6.Plastic - enginemount.