Black Horse Model Mosquito MK VI, Инструкция по эксплуатации

Страница: 25 / 34

MOSQUITO MK VI.
INSTRUCTION MANUAL.
25
VERTICAL INSTALLATION.
1. Put the rudder in the fuse lage as same
as picture below.
2. Mark the shape of the vertical on the
left and right side of the rudder on to the hori-
zontal stabilizer using a felt-tip pen.
C/A glue
3. Now, remove the rudder and using a
modeling knife, carefully cut just inside the
marked lines and remove the film of the rud-
der. Just as you did with the horizontal stabi-
lizer, make sure you only press hard enough
to cut the film, not the balsa rudder.
Also carefully remove the covering from
the horizontal fin as below the lines which
you drew as same picture below.
Mark point
Tail wheel wire