MESSERSCHMITT BF-109E Item code: BH146
.
Instruction Manual
14
2)
Mark the locations of the two mounting screws.
Remove the tail wheel bracket and drill 2mm pilot holes
at the locations marked.
XII. MOUNTING THE TAIL WHEEL
BRACKET
1)
Set the tail wheel assembly in place on the ply-
wood plate. The pivot point of the tail wheel wire should
be even with the rudder hinge line and the tail wheel
bracket should be centered on the plywood plate.
Mark
3. Secure the tail wheel bracket in place using
three 3mm x 12mm wood screws. Be careful not to
overtighten the screws.
Secure
Snap keeper
Flaslink
Pushrod wire
Servo arm
Rudder pushrod
Rudder servo
XIII. INSTALLING VALVE CONTROL
Please see pictures below.
Rudder
control horn
M2 Lock nut
M2
3 x 12mm
Drill a hole
2.5mm diameter
2. A+B
Epoxy glue
1. Push in
