Black Horse Model JU87-STUKA, Инструкция по эксплуатации

Страница: 19 / 34

JU87-STUKA -
Item code: BH80.
INSTRUCTION MANUAL
19
Center line
2 Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
C/A glue
C/A glue
1. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Remove covering.
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
When cutting through the covering
to remove it, cut with only enough pres-
sure to only cut through the covering it’s
self. Cutting into the balsa structure may
weaken it. This could lead to possible fail-
ure during flight.
Mark line.
Remove covering.