EDGE 540-V3-
ITEM CODE: BH91.
INSTRUCTION MANUAL
5
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Secure
5. Instal servo tray with aileron servo into
the wing as same as picture below.
C/A glue
Bottom side
C/A glue
Bottom side
C/A glue
2. Using a modeling knife, remove the cov-
ering servo tray.
Thread
Electric wire
Remove covering
Servo tray
