3)
Slide the cowl back over the motor and secure it in place using three
wood screws. See picture below.
4)
three
edges of the firewall. Using a 3mm drill bit, enlarge the three holes in the
cowling.
Drill
2.5mm pilot holes through both side of the cowl and the side
7
. Item code: BH163
DORNIER DO335
1)
Slide the fiberglass cowl over the motor and line up the back edge of the cowl with the marks you made on the
fuselage.
2)
While keeping the back edge of the cowl flush with the marks, align the front of the cowl with the crankshaft of the
motor. The front of the cowl should be positioned so the crankshaft is in
nearly
the middle of the cowl opening. Hold the
cowl firmly in place using pieces of masking tape.
3x15mm
Secure
Drill 2.5mm and
3x12mm.
Secure
