27
CHIPMUNK
-Item code BH44.
INSTRUCTION MANUAL.
1.Locate the aluminium wing dihedral
brace.
WING ATTACHMENT.
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
2. Attach the aluminium tube into the
fuselage.
3. Insert two wing panels as pictures
below.
Right side.
Do not permanently secure the receiver
and battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Tie wrap.
Battery
Receiver
.
Left side.
Aluminium tube 19mm
442 mm
