Black Horse Model BH136, Инструкция по эксплуатации

Страница: 44 / 49

SPITFIRE MX Item code: BH136 Instruction Manual
44
Ailerons : 15mm up 15mm down
Elevator : 12mm up 12mm down
Rudder : 30mm right 30mm left
Flap : 35mm
Ailerons : 18mm up 18mm down
Elevator : 16mm up 16mm down
Rudder : 35mm right 35mm left
Flap : 40mm
HIGH RATE
LOW RATE
1)
We highly recommend setting up a plane using
the control throws listed.
2)
The control throws should be measured at the
widest point of each control surface.
3)
Check to be sure the control surfaces move in the
correct directions.
CONTROL THROWS
FLIGHT PREPARATION PRE FLIGHT CHECK
1)
Completely charge your transmitter and
receiver batteries before your first day of flying.
2)
Check every bolt and every glue joint in your
plane to ensure that everything is tight and well
bonded.
3)
Double check the balance of the airplane.
4)
Check the control surface.
5)
Check the receiver antenna. It should be fully
extended and not coiled up inside the fuselage.
Aileron Control
15mm
15mm
Elevator Control
Rudder Control
30mm
30mm
12mm
12mm
Flap Control
35mm
CG
In order to obtain the CG specified, reposition
the receiver and other equipment.
If not obtain the CG specified, add a weight and
adjust.
Do not fly before confirming the
correct location of the CG. If the
CG is incorrect, you lose control
of your airplane which leads to
accidents.