5
WESTLAND WYVERN
- Item code:BH105
INSTRUCTION MANUAL.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Repeat the procedure for the other wing
half
.
Installing the aileron linkages as pictures
below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Thread
Electric wire
Secure.
2x10mm.
3mm x 25mm.
2.INSTALLING THE AILERON CONTROL HORN.
Control horn
of the aileron
3.INSTALLING THE AILERON
LINKAGES.
Secure.
2x8 mm.
60 mm
