Black Horce Model WESTLAND WYVERN BH112, Инструкция по эксплуатации

Страница: 30 / 32

30
WESTLAND WYVERN
- Item code:BH112 INSTRUCTION MANUAL.
Plastic parts of Fuselage
C/A glue.
Receiver.
Epoxy glue.

 

1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.

 

2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
Do not permanently secure the receiver and
battery until after balancing the model.

   4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Tie wrap.
Battery.