17
WESTLAND WYVERN
- Item code:BH112
INSTRUCTION MANUAL.
Fuel Tank
COWLING.
1. Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage.
Top side.
Bottom side.
Tie wrap.
Trim and cut
2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
3.
Slide the cowl back over the engine
and secure it in place using four wood screws.
See picture below.
4. Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
Содержание WESTLAND WYVERN BH112
Страница 9: ...9 WESTLAND WYVERN Item code BH112 INSTRUCTION MANUAL 5 X 35mm 3 x 16mm Lock Secure Secure Secure...
Страница 11: ...11 WESTLAND WYVERN Item code BH112 INSTRUCTION MANUAL Connector Secure Connector...
Страница 12: ...12 WESTLAND WYVERN Item code BH112 INSTRUCTION MANUAL 3x12mm 3x12mm Secure 3x12mm Epoxy glue 3x12mm...
Страница 26: ...26 WESTLAND WYVERN Item code BH112 INSTRUCTION MANUAL Cut Rudder pushrod bend 90 degree cut off Rudder pushrod...