20
SKY JET -
Item code: BH144
.
INSTRUCTION MANUAL
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
3. Position the battery pack and receiver
is as picture below.
Do not permanently secure the receiver and
battery until after balancing the model.
Battery of
EDF.
Ply wood of nose gear .
1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE ESC-RECEIVER
AND BATTERY.
wire cable
nose gear.
C/A glue.
ESC
