Black Horce Model extra 330l, Инструкция по эксплуатации

Страница: 23 / 27

EXTRA 330L.
INSTRUCTION MANUAL
23

 

1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.

 

2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
Do not permanently secure the receiver and
battery until after balancing the model.

   3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to hold
the battery and receiver securely in place as
pictures below
INSTALLING THE RECEIVER AND BATTERY.
Tie wrap.
switch

   4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Battery