6
EDGE -
Item code: BH69-A
.
Instruction Manual
Repeat the procedure for the other wing
half
.
INSTALLING THE AILERON CONTROL HORN.
Control horn of Aileron
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
Drill a hole
1.5mm.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Secure.
Control horn
Aileron
Install aileron control horn as same as pic-
ture below.
Drill a hole
1.5mm diameter
Secure.
Electric wire
Thread
2 x 10 mm.
A+B Epoxy
PLUS glue.
