Black Hawk FS Future, Руководство пользователя

Страница: 24 / 34

Control Elements 25
5.1.2 Display Brightness / LED Light
The illustration 5.4 shows the Display Brightness knob. Use this control to either dim or brighten the
monitor. For working with the unit during the day most will adjust the monitor and make it very bright.
During the evening, the monitor can be dimmed. When the unit is dimmed to the low setting, the LED
light will illuminate to assist you for night searches. When it is to the lowest setting then all illumination
will be turned off (no LED light and no monitor display).
5.1.3 Monitor Display
After turning on the detector the Monitor Display will
show the main screen accordingly to illustration 5.5. The
main screen shows the signal curve as well as all of the
sub-screens for the search controls. In a single instance
one can see the other settings instantly. When one of the
other controls are moved, the screen will automatically
change to the setting that is being changed.
5.2 Search Controls
In illustration 5.6, the controls on the left side of the unit are shown. These are your primary controls to
ground balancing the unit. Half of the ground balancing process has been automated simplifying the
task of ground balancing the unit.
By using these controls you will adjust the search coils to specific soil conditions.
Illustration 5.6: Left side of the control unit
Illustration 5.5: Main Screen
Sensitivity
Interference
Threshold Delay
Calibration Button
Or
ient Detectors
www.
orient
detectors.com