Black Diamond Equipment RECON LT, Инструкция по эксплуатации

Страница: 16 / 22

Manual BLACK DIAMOND RECON LT 10 / 21
4.8.6 Multiple burials | MARK function
A multiple burial is indicated clearly on the display by the number of small human figures (2G, 2H).
Marking is possible from a distance reading of 5 m and is indicated by the MARK symbol (2E). Press the button
MARK (1D) briefly to “hide” the localized transmitter. A successful flagging is confirmed by a frame around the
human figure (2J). The display then indicates the direction/distance to the next strongest signal inside the
receiving range. If there are no further signals within the receiving range the display indicates “no signal”.
prior to marking after marking
De-mark a single signal: press the button MARK
(1D) for 3 seconds.
De-mark all: switch to send mode and then back
to search mode.
Continuous wave indication | old-device-indication
Old analog transceivers are transmitting a continuous wave in addition to the pulse signal. To keep an impact at a
minimum, it is recommended to step a few meters away after marking such a transmitter.
Signal without continuous wave Signal with continuous wave
The BLACK DIAMOND RECON LT identifies a continuous wave and
supports visually by flashing human figures.