6
ENGLISH
(Original instructions)
Use
Warning! Let the tool work at its own pace. Do not
overload.
Screwdriving / nut setting
Note: Ensure the forward reverse slider (2) is not
in the locked position.
u
Select the appropriate bit / socket for the screw
or nut to be driven.
u
Select forward or reverse rotation as described
above.
u
Hold the tool in line with the fastener.
u
After tightening, check torque with a torque
wrench.
Hints for optimum use
Screwdriving
u
Always use the correct type and size of screw-
driver bit.
u
If screws are difficult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant.
u
Always hold the tool and screwdriver bit in a
straight line with the screw.
Accessories
The performance of your tool depends on the
accessory used. B
LACK+DECKER
and Piranha ac-
cessories are engineered to high quality standards
and designed to enhance the performance of your
tool. By using these accessories you will get the
very best from your tool.
Technical data
Sander
MTIM3
(14.4v)(H1)
MTIM3
(Max)(H1)
No-load speed
min
-1
0-2800
0-3000
Beats
min
-1
0-3100
0-3500
Max. torque
(PTI Rating)
Nm
170
205
Chuck capacity
mm
6 (Hex)
6 (Hex)
Weight
kg
1.3
1.3
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 96.2 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 107.2 dB(A), uncertainty (K) 3 dB(A)
