Black+Decker JS10, Руководство пользователя

Страница: 6 / 40

6
ENGLISH
(Original instructions)
g. Be aware of hidden hazards, before
cutting into walls, floors or ceilings,
check for the location of wiring and
pipes.
h. The blade will continue to move after
releasing the switch. Always switch the
tool off and wait for the saw blade to
come to a complete standstill before
putting the tool down.
Warning! Contact with, or inhalation
of dusts arising from cutting
applications may endanger the
health of the operator and possible
bystanders. Wear a dust mask specifically
designed for protection against dust and
fumes and ensure that persons within or
entering the work area are also protected.
i. The intended use is described in this
instruction manual. The use of any
accessory or attachment or performance
of any operation with this tool other than
those recommended in this instruction
manual may present a isk of personal
injury and/or damage to property.
Electrical safety
Your tool is double insulated;
therefore no earth wire is required.
Always check that the main voltage
corresponds to the voltage on the
rating plate.
Warning!
If the power cord is
damaged, it must be replaced by
the manufacturer, authorized
BLACK+DECKER Service Center or
an equally qualified person in order
to avoid damage or injury. If the
power cord is replaced by an equally
qualified person, but not authorized
by BLACK+DECKER, the warranty
will not be valid.
Labels on tool
The label on your tool may include the
following symbols:
List of Contents
1 Jigsaw
1 Hex key
Position of date barcode
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Safety of others
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks can not
be avoided. These include:
• Injuries caused by touching any
rotating/moving parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a
tool. When using any tool for prolonged
periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool
(example: working with wood, especially
oak, beech and MDF.)
Read
Instructions
Manual
Use Eye
Protection
Use Ear
Protection
V ........ Volts
A ........ Amperes
Hz ....... Hertz
W ........
Watts
min ..... minutes
.....
Alternating
Current
.....
Direct
Current
n
0
....... No-Load
Speed
......
Class II
Construction
....
Earthing
Terminal
....
Safety Alert
Symbol
.../min.. Revolutions
or Recipro-
cation per
minute