Black+Decker FSMH13151SM, Руководство пользователя

Страница: 11 / 23

11
ENGLISH
fitted.
Attaching the hose
u
Press the steam hose release button (16a) on the steam
hose (16).
u
Connect the steam hose (16) to the hand held steam
cleaner (5) and release the steam hose release button
(16a) making sure it clicks into place.
Important! Ensure that the steam hose (16) is securely
connected to the hand held steam cleaner (5). If steam
escapes from the joint, the hose is incorrectly fitted. Switch off,
allow the unit to cool then remove and refit the hose.
Attaching accessories (Fig H)
u
Align the lugs on the steam nozzle (17) with the recesses
on the accessory.
u
Press the accessory onto the steam nozzle (17) and twist
anti-clockwise until the accessory clicks into place.
Important! All accessories, apart from the SteaMitt
TM
(22)
which has its own hose and connector (23), must be attached
to the steam hose (16) for use.
Removing the hose and accessories
Warning! The steam hose (16), Steam nozzle (17) and
accessories become hot during use. Allow the unit and all
accessories to cool before attempting to remove.
Removing an accessory
u
Twist the accessory clockwise then pull away from the
hose (16).
Removing the hose
u
Press the steam hose release button (16a) on the steam
hose (16) and pull away from the hand held steam unit.
SteaMitt
TM
Your BLACK+DECKER
TM
SteaMitt
TM
has been designed for
sanitising and cleaning tiles, work tops, kitchen surfaces and
bathroom surfaces. This appliance is intended for indoor
household use only.
Attaching the SteaMitt
TM
hose to the hand held
steam unit
Warning! Inspect the seal on the steam nozzle and hose
before each use. If the seal is missing or damaged then
please contact your nearest authorised repair agent. Do not
use the appliance. Inspect the seal on the SteaMitt
TM
and
hose If the seal is missing, damaged or any steam is escaping
then please contact your nearest authorised repair agent.
Do not use the appliance. Ensure there is no blockage or
impedence in the SteaMitt
TM
hose or attachment hose. If any
are detected then please contact your nearest authorised
repair agent. Do not use the appliance.
Fitting a cleaning pad to the
SteaMitt
TM (Fig. K)
Warning! Ensure there is no blockage or impedence in
the steam release vents If any are detected then please
contact your nearest authorised repair agent. Do not use the
appliance.
u
Fit the cleaning pad (24) to the SteaMitt
TM
(22) by
attaching the 'loop' velcro strips (24a) on the upper side
of the cleaning pad, to the 'hook' velcro pads (22a) on the
underside of the SteaMitt
TM
(4). Press down firmly.
Warning! The SteaMitt
TM
should not be used without fitting a
cleaning pad.
@
Warning! Always use the SteaMitt
TM
as shown in
figure M, with your hand inside the protective glove.
@
Warning! Never attempt to use the SteaMitt
TM
by
gripping it externally as shown in figure N.
This will result in scalding.
@
Warning! Avoid using the SteaMitt
TM
in tight corners
as shown in figure O.
@
Warning! Should a problem occur during use,
use the quick release tab to quickly remove the
SteaMitt
TM
from your hand as shown in figure P.
@
Warning! Do not use the SteaMitt
TM
on cold glass,
such as windows as damage may be caused by the
sudden change in temperature.
@
Warning! Never point or direct the mitt at yourself
or any other person.
Note:
It is recommended that the SteamMitt be used in
setting 1 to avoid the pad becoming too wet.
Use
Important! This unit will kill 99.9% of bacteria and germs
when used in accordance with the instructions in this manual
and with the micro fibre pads fitted and a continuous run time
of 90 seconds.
Switching on and off
u
To switch the appliance on, press the ON/Off switch (1).
It takes approximately 15 seconds for the steam mop to
heat up.
u
To switch the appliance off, press the ON/Off switch (1).
Note: always have your hand inside the SteaMitt
TM
before you
press the steam button.
Caution! Never leave the steam mop in one spot on any
surface for any period of time.
Always place the steam mop with the handle (8) supported in
the upright position when stationary and make sure the steam
mop is turned off when not in use.
Caution! Always empty the steam mop after use.