7
12. Once coffee grounds have cooled, carefully open cover and, discard used
grounds. Close cover.
13. The coffeemaker will keep brewed coffee hot for 2 hours and then
automatically turn off.
To turn off the coffeemaker at any time press the ON/OFF button. The ON/OFF
(I/O) light goes off. Unplug appliance when not in use.
BREWING 1 TO 4 CUPS
Note
: This feature slows down the brewing to extract the best flavor when brewing
a small amount of coffee.
1.
Add the appropriate amount of water for the number of cups to be brewed
(from 1 – 4).
2. Fill paper filter with desired amount of coffee grounds.
3. Press the STRONG/1-4 CUP button twice. 1-4 CUP is displayed.
Note:
When using this feature coffee will be brewed at regular strength only.
4. Press the ON/OFF (I/O) button, its light illuminates and the brewing cycle
begins.
5. To turn off the coffeemaker at any time, press the ON/OFF button.
SNEAK-A-CUP
®
FEATURE
Remove the carafe and brewing is paused. The carafe must be placed back on the
carafe plate in 30 seconds to prevent overflow. Brewing begins again.
AUTO BREW
1.
Follow steps 1 through 10 under BREWING COFFEE.
2. Make sure clock has been set to correct time of day.
3. Press the program (PROG) button.
4. The digital clock will flash 12:00.
Note
: If the coffeemaker has not been unplugged the last delayed brewing time
will appear on the digital display.
5. To change the time: press HOUR button until the desired correct time appears
on the display. Press the MIN button to select the minutes.
6. Press the AUTO button to activate the delayed brewing. The word AUTO is
displayed.
7. To check the preset auto time, press PROG button and hold it. Once button is
released, the clock time will display again.
8. If you want to change the preset auto time, press the AUTO button to cancel
the AUTO function. The word AUTO goes off from digital display.
9. Follow steps 3 through 6 under AUTO BREW to reset time.
10. To cancel auto brew, press AUTO button. The word AUTO goes off from the
digital display.
