ENGLISH • 13
No detergent sucked in
Adjustable nozzle on high pressure
setting
Set nozzle (4) on « » setting (Fig. C)
Detergent too dense
Dilute with water
High pressure hose extension being
used
Fit original hose
Deposits or restriction in detergent
circuit
Flush with clean water and eliminate any
restrictions. If the problem persists, contact an
Authorised Service Centre
Water escapes from thermo-
stat valve
Water temperature inside pump head
has exceeded max. rated value stated
on nameplate
With appliance in operation, do not stop the
water jet for more than 5 minutes at a time
* If the motor starts and does not restart during operation, wait 2-3 minutes before repeating the start-up procedure
(overload cutout has been tripped).
If the problem recurs more than once, contact your nearest Authorized Service Centre.
Содержание BW13
Страница 47: ......
Страница 48: ...05 2020 ...