Black+Decker BEMW451BH, Руководство пользователя

Страница: 13 / 48

12
ENGLISH
13
ENGLISH
clippings which may have accumulated on the underside of
the deck. After several uses, check all exposed fasteners for
tightness.
Preventing corrosion
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals.
If you mow in areas where fertilizers or chemicals have been
used, the mower should be cleaned immediately afterward as
follows:
Turn the mower off and unplug mower. Wipe all exposed parts
with a damp cloth.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Regularly clean the ventilation slots in your tool/appliance
using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Warning! Before proceeding, release the bail bar to turn
mower off and wait for the blade to stop.
Problem Possible cause Possible solution
Mower will
not start.
Cord is not
plugged in.
Plug mower into a work-
ing outlet.
Circuit fuse is
blown.
Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse
to blow, discontinue use
immediately and have
itserviced by an author-
ised BLACK+DECKER
service center.
Cord or switch
is damaged.
Have cord or switch
replaced at an author-
ised BLACK+DECKER
service center.
Grass too long. Increase the height of
cut and move machine
to shorter grass to start.
Machine func-
tions intermit-
tently.
Thermal cut out
activated.
Allow motor to cool and
increase height of cut.
Machine
leaves ragged
finish or mo -
tor labours.
Height of cut
too low.
Increase height of cut.
Cutting blade
blunt.
Replace the blade.
Underside
of machine
clogged.
Check underneath the
machine and clear out
as necessary (always
wear heavy duty gloves)
Blade fitted
upside down.
Refit blade correctly.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Service Information
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All BLACK
+DECKER Service Centers are staffed with trained personnel
to provide customers with efficient and reliable product
service.