ENGLISH
ENGLISH
P.
22
P. 23
Battery Installation and Removal:
1. Turn of the power switch before installing the battery.
2.
Removing the battery:
To open the battery cover first by pressing the two points “A”
(marked in the below diagram) and slide the battery cover in the direction of arrow “B”
(marked in the below diagram). Then push the battery toward the springs’ side in order to
take out the battery easily.
3.
Replacing the battery:
To install the new battery in the battery compartment with correct
po and - sign which marked on the battery compartment. Put to battery connecting
dots side down close to the springs mounted on the battery compartment, then push
toward springs for easier inserting the battery. Be sure to orient the battery contacts with
those of the unit. Slide back the battery cover to close it.
Battery Reservoir
WARNING:
Make sure the vacuum is completely dry before using it.
REPLACEMENT PARTS
Item
Name
Part No.
1
Rechargeable Battery
V660-REBY
2
Adaptor
V660-ACAD
3
Dust Bin Filter
V660-DBFR
4
Side Brush
V660-SBH2
5
Docking Station
V660-DSTN
6
Brush Roll
V660-BRRL
7
Room Containment unit
V660-RMCM
