10. Insert (2) AAA batteries into the remote control.
11. Turn on your TV, VCR, etc. If necessary, select Video IN (or S-Video In or RGBS Video IN) as the receiving device's
video input source. If you're unsure how this is done, consult the Owner's Manual for the receiving device.
12. Insert the "VGA-Video Ultimate" installation disk.
13. Run "SETUP".
14. Choose COM port setting that corresponds with the COM port to which you connected the mouse cable.
15. Installation sets up the Folder "Ultimate" in the Programs Menu. Run the program any time you wish to use the
Remote Mouse function.
NOTE:
The power ON/OFF switch toggles the power for the Ultimate, but the remote mouse will continue to function if connected with
the power off. The ZOOM LED will blink as long as the power supply is plugged in.
Operation:
While plugged in and securely connected with the power on, the Ultimate performs signal conversion more or less automatically. For
this reason, operating Ultimate consists primarily of using its controls to fine-tune your application. The controls are detailed below:
Ÿ
HORIZONTAL/VERTICAL position adjustments
Indicated by arrows on the converter and on the remote.
Ÿ
FREEZE button
Toggle between frozen and normal display
Ÿ
ZOOM button
Toggle between Zoom and Normal display. The buttons on the remote labeled with diagonal arrows represent the
Area Zoom, and when pressed zooms the corresponding quadrant of the TV display.
NOTE:
When the image has been enlarged using the ZOOM controls, the V.POS, H.POS and FREEZE functions will operate. The
SIZE control will not operate.
