Black Box Terminal Server, Руководство пользователя, Страница: 68 / 131

Configuring Lines
68 Terminal Server User Guide
BIDIR Settings
When the
Line Service
is set to
BIDIR
, a bidirectional connection is created, with data flowing in
both directions in its original format. This raw TCP/IP connection can be initiated from either the
Terminal Server or the configured host.
Configure the following parameters:
UDP Settings
When the Line Service is set to UDP , the Terminal Server processes UDP packets according to
the UDP settings.
Configure the following parameters:
Host Name
The name of the target host.
Port
The port number the target host is listening on for incoming connections.
Start IP Address
The first host IP address in the range of IP addresses (for IPV4 or IPV6)
that the Terminal Server will listen for messages from and/or send
messages to.
End IP Address
The last host IP address in the range of IP addresses (for IPV4, not
required for IPV6) that the Terminal Server will listen for messages from
and/or send messages to.
Port
The port that the Terminal Server will use to receive messages from or relay
messages to servers/hosts.
Direction
The direction in which information is received or relayed:
z None —UDP service not enabled.
z
In —LAN to serial.
z
Out —Serial to LAN.
z Both —Messages are relayed both directions.