Black Box Terminal Server, Руководство пользователя, Страница: 40 / 131

SNMP
40 Terminal Server User Guide
SNMP
Before you can configure/manage the Terminal Server using SNMP, you need to set the
Terminal Server IP address and configure a read-write user for SNMP version 3 or a community
for SNMP version 1 or 2. You can use DeviceManager, CLI, or the Menu to set the IP address
and user/community (don’t forget to reboot the Terminal Server before connecting with the
SNMP manager to make your changes take effect).
Once the IP address and user/community have been set, load the file from the Terminal Server
CD-ROM into your SNMP manager.
Connect to the Terminal Server through your SNMP manager using its IP address to
configure/manage the Terminal Server. Expand the
BLACKBOX-TERMINAL-SERVER-MIB folder
to see the Terminal Server’s parameter folders. Below is an example of the configurable
parameters under the
ServicesInfo
folder.
The first variable in each folder is the
Status
variable, for example,
serviceStatus
. When you
perform a
GET
on this variable, one of the following values will be returned:
z
1 —Indicates that the container folder is active with no changes.
z
2 —Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you will want to submit your changes
to the Terminal Server. To do this, set the
Status variable to 4 . If you want to discard the
changes, set the Status variable to 6 .
z 4 —Indicates that the changes in the container folder are to be submitted to the Terminal
Server.
z 6 —Indicates that the changes in the container folder are to be discarded.
If you want to save all the changes that have been submitted to the Terminal Server, you need to
expand the
adminInfo
container folder and
SET
the
adminFunction
to
1
to write to FLASH. To
make the configuration changes take effect,
SET
the
adminFunction
to
3
to reboot the Terminal
Server.