Black Box SWI030A, Руководство пользователя

Страница: 21 / 32

19
CHAPTER 4: Operation
a
is the address of the Switch(es) that you are
sending the command to:
If you enter a number from 0 to 9 for the
a
value, only the specific Switch that you have
selected will receive the command.
If you enter “*” (an asterisk) for the
a
value, all of the Switches will receive the
command.
c
is the operation code:
If you enter “0” (zero) for the
c
value, the
Pow-R-Switch(es) that receive the command
will turn OFF power to their AC outlets.
If you enter “1” (one) for the
c
value, the
Pow-R-Switch(es) that receive the command
will turn ON power to their AC outlets.
If you enter “T” for the
c
value, the Pow-R-
Switch(es) that receive the command will
toggle power (turn power OFF, wait a few
seconds, then turn it back ON) to their AC
outlets. This command is case-sensitive—you
must enter an uppercase “T,” not a
lowercase “t.”
If you enter “?” for the
c
value, the Pow-R-
Switch(es) that receive the command will
return ASCII character strings indicating the
status of their AC outlets.
^M
is an abbreviation for the [CTRL] [M]
character (the ASCII carriage return, [CR]),
which you can generate by pressing the
[ENTER] or [RETURN] key.