Black Box SOHO JPM1110A, Руководство пользователя

Страница: 17 / 19

14
SOHO NETWORK BOXES
3.2.4 O
UTLET
B
OXES
The two rectangular knockouts located on the bottom of the SOHO Network Box
are designed for power outlet boxes. Some equipment may require AC power;
these specially designed knockouts allow you to mount the outlet boxes (not
included) without wires running outside the box.
Figure 3-7. Power outlet mounting.
3.3 Cable Handling Guidelines
Follow the guidelines listed below when handling cable:
• Do not route cable through the same cable holes as the AC power cables.
• Separate all cables from parallel AC power lines by at least 6 inches (15.2 cm),
whenever possible, for safety reasons.
• Avoid kinking the cable.
• Do not attach cable tie-downs too tightly. The cable-fastening hardware should
not compress the cable sheath.
• Do not bend the cable sharply. Be especially careful to place the cables
properly in the cable management after passing them through a hole (the
edges of the hole can compress or even damage the cable sheath).
• When mounting the individual modules in the SOHO Network Box, be sure to
install it above or below the interfacing module, if possible. This will eliminate
excessive cable crossing.
• Follow all warnings on the products.