Black Box ServSwitch KV0202A, Инструкция по установке и эксплуатации

Страница: 30 / 45

SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
27
d. Issue the “Set mode” command (Ctrl,Mnn,[Enter])
Example: if the mouse type is a serial 2 button mouse, the
command would be Ctrl,M7,[Enter]
e. Issue the “Keep” command to save the new values
(Ctrl,K,[Enter])
f. Perform steps a through e for each CPU port that needs the
default keyboard and mouse changed to a different type.
4. Boot the computer if power was not applied. You should see the boot-
up sequence on the KVM monitor. If the computer was connected with
power applied, you should see that computer’s video.
5. Verify that the keyboard, video, and mouse function properly before
proceeding.
6. Switch to the next sequential CPU port as explained in step 2 and
perform steps 3-5 for this computer and for the remaining computers.
Figure 9. Cascading units
KVM Station
Master
Slave#1
Slave#2
Dual video CPUs 1-4
Dual video
CPUs 5-8
Two additional “Slave”
units can be added to this
configuration.