Black Box ServSwitch KV0202A, Инструкция по установке и эксплуатации

Страница: 16 / 45

SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
13
Scan mode
This value turns scanning on or off. To change this value, select “Scan
mode” and press enter. An input box will appear. Select “On” or “Off” and
hit enter.
Power on scan
Setting this value to “On” will enable scanning when the ServSwitch
MultiVideo is powered on. To change this value, select “Power on scan”
and hit enter. Use the up/down arrow keys to select “OFF” or “ON” and
press enter.
Keyboard settings
The keyboard setting section of the configure system menu is used to
change the typematic rate and delay for PC keyboards and also to set the
language type for Sun keyboards.
Rate (keys/sec)
To change the rate value, highlight “Rate (keys/sec)” and press enter. An
input box will appear. Choose the rate value from table 5 that represents
the Rate keys/sec needed and press enter.
Delay
This setting is for PC keyboards only. It is used to adjust how long, after a
key is depressed and held, that key starts to repeat. To change the delay
value, select “Delay” and press enter. A list box will display showing the
choices available. Use the up/down arrow keys to select the delay rate
wanted and press enter.
The choices are:
n
Slow (1 second)
n
Medium (750 ms.)
n
Fast (500 ms.)
n
Fastest (250 ms.)
Sun Language (ServSwitch Ultra MultiVideo)
If the Sun keyboard type you are using is not a US Sun keyboard, the
language can be changed to the correct language keyboard. To change
the language type, select “Sun Language” and press enter. A list box will
display showing the language choices available. Use the up/down arrow
keys to select the correct Sun Keyboard language and press enter.
The choices are:
¾
US
¾
Spanish
¾
US Unix
¾
Swed/Finn
¾
French
¾
SWFrench
¾
Danish
¾
SWGerman
¾
German
¾
UK
¾
Italian
¾
Korean
¾
Neth/Dutch
¾
Taiwan
¾
Norwegian
¾
Japan
¾
Portuguese
¾
FrCanadian