ServSwitch Agility and Agility Dual
724-746-5500 | blackbox.com
Page 26
3.2.8 Remote Microphone & Speakers
ServSwitch Agility (and Agility Dual) remote units can support a microphone as well as speakers providing the necessary connec-
tions have been made between the ServSwitch Agility local transmitter unit and the host computer.
3.2.8.1 To connect a microphone (or line in) and/or speakers on ServSwitch Agility
1 Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket
labelled
LINE IN/MIC IN
on the rear panel. See Figure 3-19.
LINE IN
/
LINE
OUT
CON
SOL
E
MIC IN
Connection from
microphone or line in
from audio device
Figure 3-19. Connect the speaker and microphone cables to audio sockets.
2 Connect the lead from stereo speakers to the 3.5mm socket labelled
LINE OUT
on the rear panel.
3 Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the
Audio
Input Type
setting matches the connection that you have made to the port:
line
,
mic
or
mic boost
(the latter pr20dB
gain).
3.2.8.2 To connect a microphone (or line in) and/or speakers on ServSwitch Agility Dual
1 Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket
labelled on the rear panel. See Figure 3-20.
Figure 3-20. Connect the speaker and microphone cables to audio sockets.
2 Connect the lead from stereo speakers to the 3.5mm socket labelled on the rear panel.
3 Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the
Audio
Input Type
setting matches the connection that you have made to the port:
line
,
mic
or
mic boost
(the latter pr20dB
gain).
AUX
1
Link out to
speakers
Connection from
microphone or line in
from audio device
Link out to
speakers
