ServSwitch Wizard DVI/USB SRX
724-746-5500 | blackbox.com
Page 16
RE
MO
TE
PO
W
ER
S e
r v
S w
B
3.2.2.2 USB connections
1 Connect the leads from the keyboard and mouse to two of the USB sockets on the remote module as shown in Figure 3-15:
Figure 3-15. Attaching the keyboard and mouse USB cables
IMPORTANT: The total current that may be drawn from the USB ports is 1.2A, which should be sufficient for a keyboard,
mouse (no more than 100mA each) and any two other devices (500mA maximum each). If more power for USB devices is
required, please use a powered USB hub.
RE
MO
TE
PO
W
ER
S e
r v
OU
T
Note: It is not important
which of the four sockets
are used.
[Dual-variant only] Connect the leads from the keyboard and
mouse to the two USB sockets on the remote module.
Fed from the UPPER socket
on the local unit
Fed from the LOWER socket
on the local unit
Figure 3-16. Attaching the keyboard and mouse USB cables to the dual-variant remote module
2 Where other USB peripherals are also required, connect up to two other leads to the remaining USB sockets.
