Black Box ServSwitch ACU3201A, Руководство пользователя

Страница: 37 / 58

LOCAL UNIT OPERATION
35
Local Console Commands
After pressing the initial ‘hot’ key sequence ( <Left Control> + <Scroll Lock> + <F10> ) on
the Local keyboard, you can issue a number of commands by pressing additional keys. These
commands allow you to control a Private mode session at the Local console, reset the
keyboard and mouse or restore the Local Unit’s factory default settings.
Command Key Sequence
Toggle Local Unit Private Mode <Scroll Lock>
ACU3209A, ACU3228A only
Use this command to begin or end a Private Mode session at the Local console (see page 32).
Toggle Remote Video Blanking State <Left Control> + <Scroll Lock>
ACU3209A, ACU3228A only
Use this command to determine whether the Remote console monitor will be blanked (default
setting) or enabled during a Private mode session at the Local console (see page 32).
Reset Local Keyboard and Mouse <F1>
Resets the Local console’s keyboard and mouse. You may need to do this if you have hot-
plugged a keyboard or mouse and it has not initialized correctly.
Mouse Recovery <F3>
Use this command if you experience erratic movement of the mouse pointer or you have lost
mouse movement after hot plugging the Local unit into the CPU. In the case of erratic mouse
movement, you may need to enter the command a number of times to re-synchronize the
mouse signal. Alternatively, stop moving the mouse for a few seconds and the operating
system’s mouse drivers may automatically re-synchronize the signal. If the Local unit has
been hot-plugged, this command will issue a request to the OS to initialize the mouse.
Use
this command with care.
Exit Command Mode and Save <Esc>
Exit Command Mode and save all settings to EEPROM.
Set Local Unit to Default State <Left Control> + <F9>
Restore Local Unit factory defaults (configuration and DDC).