Black Box ServSwitch ACU3201A, Руководство пользователя

Страница: 13 / 58

QUICK SETUP
11
1.1 Command Summary
By using a specific ‘hot’ key sequence, you can put the Remote console keyboard into a
Command Mode. From this, you can use various keys and key combinations to equalize the
video signal and generally configure the extender system. The following table summarizes the
‘hot’ key command sequences (see page 28).
Command Mode
Enter Command Mode*
Exit Command Mode & Save*
Exit Command Mode Without Save* <Left Control> + <Left Shift> + <F10>
<ESC>
<Left Control> + <ESC>
Video - Channel Selection, Equalization and DDC
Select Channel For Adjustment
Select BOTH Video Channels
Toggle Video Equalization
Disable DDC Emulation
Enable DDC Emulation
Transfer DDC from monitor to Local Unit <1>, <2>
<0>
<Left Control> + <E>
<Left Control> + <F2>
<F2>
<Left Control> + <D>
Reset Commands
Reset Mouse and Keyboard*
Mouse Recovery*
Set Extender To Default State*
<F1>
<F3>
<Left Control> + <F9>
Private Mode
Toggle Private Mode*
Toggle Video Blanking State at other console* <Scroll Lock>
<Left Control> + <Scroll Lock>
* Commands also available at Local console in Dual Access Kits: ACU3209A and
ACU3228A (see page 34).