Black Box ServSelect III, Руководство пользователя

Страница: 40 / 60

SERVSELECT III INSTALLER/USER GUIDE
38
4.6 Scanning Your System
In scan mode, the appliance automatically scans from port to port (server to server). You
can scan up to 16 servers, specifying which servers to scan and the number of seconds that
each server will display. The scanning order is determined by placement of the server in
the list. The list is always shown in scanning order. You can, however, choose to display
the server’s name or EID number by pressing the appropriate button.
To add servers to the scan list:
1. If the OSD interface is not open, press
Print Screen
. The Main dialog box will
appear.
2. Click Setup - Scan. The Scan dialog box displays.
Figure 4-18. Scan Dialog Box
3. The dialog box contains a listing of all servers attached to your appliance. Click the
checkbox next to the servers you wish to scan.
-or-
Double-click on a server’s name or port.
-or-
Press
Alt
and the number of the server you wish to scan. You can select up to 16 servers
from the entire list.
4. In the Scan Time box, type the number of seconds (from 3 to 99) of desired time
before the scan moves to the next server in the sequence.
5. Click OK.
To remove a server from the scan list:
1. In the Scan dialog box, deselect the checkbox next to the server to be removed.
-or-
Double-click on the server’s name or port.
-or-
Click the Clear button to remove all servers from the scan list.
2. Click OK.