CHAPTER 6: Planning and Installing an Expanded System (Optional)
53
Figure 6-1. A two-unit ServSwitch Multi system.
To successfully configure and install your expanded ServSwitch Multi system, you will need to figure out all of
these things:
1. Where to put your ServSwitch Multi units and how to interconnect them (see
Section 6.1
—also
Chapter 7
if your system includes any ServSwitch Multi Hub).
2. How you are going to distribute your Expansion Cards and your computers, console equipment, serial
control devices, and associated Interface, Serial Control, and Management Cards among the Switches (see
Section 6.2
).
3. What addresses and distance you’re going to configure your Expansion Cards for, and how you will do this
(see
Section 6.3
).
4. How to install your Expansion Cards (see
Section 6.4
) and Cables (see
Section 6.5
) and visually inspect
your system-in-progress (see
Section 6.6
).
5. Lastly, of course, how to install your User-Interface Cards (see
Chapter 3
), your CPU-Interface Cards (see
Chapter 4
), and, if any, your Management and Serial Cards (see
Chapter 5
).
X
M
T
R
C
V
C
P
U
U
S
R
R
C
V
U
S
R
C
P
U
X
M
T
Содержание ServerSwitch Multi KV162RA
