Black Box ServCenter II RF524A, Руководство пользователя

Страница: 22 / 30

CHAPTER 3: Assembly
19
3.5 Retractable Keyboard Holder
1. When attaching the keyboard holder to the sheet metal bracket, insert the first tiny wheel through the
large hole at the back of the bracket. See Figure 3-12.
2. Lift up the wire keyboard holder and, holding it at an angle, slide it along the slot.
Figure 3-12. Attaching the keyboard holder to the metal bracket.
3. Insert the second small wheel through the same hole into which you inserted the first wheel. Be careful
not to deform the bracket.
4. Repeat steps 2 and 3 for the other side of the keyboard holder. When both brackets are in place, connect
the wire keyboard holder to a sheet metal shelf or a wood work surface.
5. Attach the assembled keyboard holder to the tower/add-on shelf or wood work surface before installing
the shelf to the end brackets and frame.
6. Before tightening the keyboard holder screws into the bottom of the shelf or work surface, make certain
that the holder moves smoothly in its track. You might need to adjust this so that it operates smoothly.
This end forward
Second wheel
Wire keyboard holder
First wheel
Bracket Hole