manualshive.com logo in svg

Black Box Peripheral Sharer 2 to 1, Руководство пользователя

Поделиться
Скачать
Black Box Peripheral Sharer 2 to 1 Скачать руководство пользователя страница 8

8

Peripheral Sharer

exceeding 500,000 characters per
second (4 Mbps) are supported.

Connectors

—PI138A, PI138AE:

(3) DB25 female: (2) bidirectional 
parallel ports for connection to 
PCs, (1) bidirectional parallel port 
for connection to peripherals; 
PI140A, PI140AE:  (5) DB25 
female: (4) bidirectional parallel 
ports for connection to PCs, 
(1) bidirectional parallel port for 
connection to peripherals.

Operation 

—Can be used in auto-

scan mode, manual select mode,
or software-controlled mode.

Keypad 

— Used to select auto-scan

mode, destination or toggle 
between manually selected ports.

Status Display 

— 7-segment display

shows auto-scan mode, auto-
matically selected port, manually
selected port and data flow.  LED
indicates output channel A/B
selected.

Options 

— Timeout options of 20

seconds, 1 minute, 2 minutes, or
4 minutes.  Normal or high scan
rates.  Stored in EEPROM and
retained when power is off.  Can
be changed using download 
program provided.  Default
options can be selected by 

1. Specifications

General Compatibility 

— Can be 

used with most devices that attach 
to PC parallel ports (with the aid 
of the SMARTLOG program 
supplied).  Only one user has 
access to the shared peripheral at 
a time.  Dongles may only be 
shared in strict accordance with 
software license agreements.

Printer Compatibility 

— DOS, 

Windows

®

, and graphics printing 

from all types of PCs; all printers
with unidirectional (Centronics

®

compatible) parallel ports;  
printers with bidirectional and 
BOISE parallel ports; GDI
printers.

Tape-Drive Compatibility 

— Tape 

drives that attach to PC parallel 
ports; tape-drive macros and 
scheduled macros that run from 
the DOS prompt.

CD-ROM Compatibility 

— CD-

ROM drives that attach to PC
parallel ports with drivers that 
can be loaded from the DOS
prompt.

Performance 

— Data-transfer rates

Содержание Peripheral Sharer 2 to 1




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды