22
Compact T1 - Release 6.1
Quick Start
Configuration
Initial Setup
Use the following commands for your initial setup, for further information see the
specific command listed in this chapter.
Set Up Security
Use the following commands to set up the security on the Compact T1. See the set user
command for details.
Command
Description
set local off
Disables DIP switches.
set date {mm/dd/yyyy}
Set the date used for event logging.
set time {hh:mm:ss}
Set the time used for event logging.
set id {"id-name"}
Set a system ID name.
set clock1 {slot:port}
internal
Set the primary clock source.
set clock2 {slot:port}
internal
Set the secondary clock source.
set ethernet ip address
{ip-addr} {mask}
Set the ethernet IP address, in the
conventional IP address format.
set ip gateway {ip-addr}
Set the IP gateway, in the conventional IP
address format.
Command
Description
set user {"username"}
level {1-3}
Specify the user name and the security level.
set user {"username"}
password
Set a password for the user.
