9
CHAPTER 3: Installation
6. Insert the connector hardware on each side of the
Driver. Snap the unit together. See
Section 3.2
.
7. Plug the Driver directly into a mating RS-232C
connector on your terminal or computer. Tighten
the two captive connector screws.
1 - Blue
2 - Orange
3 - Black
4 - Red
5 - Green
6 - Yellow
7 - Brown
8 - Slate
1 - Blue
2 - Yellow
3 - Green
4 - Red
5 - Black
6 - White
XMT+
XMT-
G
RCV-
RCV+
- - - - - - - - -
G
RCV-
- - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - RCV+
To Shield (Optional)
- - - - - - - - - - - - - - - - - - - - - XMT-
- - - - - - - - - - - - - - - - - - - - - XMT+
One Pair
One Pair
G
