15
CHAPTER 4: Configuration
NOTE
The actual line rate of the Line Driver is determined by the selection of
the DTE rate. To see the line rate associated with various DTE rates,
refer to the distance chart in the Appendix.
Switch S3-7: Reset Software Defaults
Use Switch S3-7 to reset the software-configured factory defaults. This feature is
applicable only using the Managed Micro Rack SNMP/HTTP Card (part number
RM261C-SNMP) to SNMP manage your units. For more information, please refer
to the
Managed Micro Rack SNMP/HTTP Card Users’ Manual
.
Table 4-5. Reset software defaults.
S3-7
Setting
On
Normal Operation
Off
Reset
Switch S3-8: Reserved
Switch S3-8 is reserved for factory use and must remain in the On position.
