manualshive.com logo in svg

Black Box MD361C-PC, Руководство пользователя

Поделиться
Скачать
Black Box MD361C-PC Скачать руководство пользователя страница 13

13

CHAPTER 3: Installation

3.1  Plug and Play Installation

Your new modem features Plug and Play installation, the fastest, easiest way 
to add new devices to your PC.

Plug and Play allows a computer to configure the modem’s settings
automatically. Your computer sets the optimal configuration for the modem
and your software applications automatically adjust to that configuration.

Most newer computers support Plug and Play. If yours doesn’t, you’ll have 
to make some simple adjustments; see 

Section 3.1.2

.

Consult your software manual or computer manufacturer to see whether 
your system supports the Plug and Play features.

Once your system sets the configuration, it will use this configuration every
time you turn on your machine.

In order to activate the Plug and Play feature with your modem, you must take
off all the contacts on the COM port and IRQ jumpers on the modem. You
will be able to tell which COM port your modem has been set to by having
your communications software search for the COM port.

Using the figure on the next page, find where the COM port and IRQ
jumpers are located on your modem.

3. Installation

Содержание MD361C-PC














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды