12
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: OVERVIEW
2.6 HARDWARE DESCRIPTION
2.6.1 TOP PANEL (ALL MCX-S7-ENC AND MCX-S7-DEC SERIES UNITS)
Figure 2-1 shows the top panel of the units. Table 2-2 describes its components.
POWER
VIDEO
P1
LINK TX
LINK RX
1
2
3
4
5
FIGURE 2-1. TOP PANEL (ALL MCX-S7-ENC AND MCX-S7-DEC SERIES UNITS)
TABLE 2-2. TOP PANEL COMPONENTS
NUMBER IN FIGURE 2-1
COMPONENT
DESCRIPTION
1
Power LED
On: The device is powered on.
Off: The device is powered off.
2
Video LED
On: A stable video signal is detected.
Off: No stable video signal is detected.
3
Link TX LED
Blinking: The device is linked to an Ethernet Switch. / The link between TX and RX is normal.
Off: The device is not linked to an Ethernet Switch. / No link between TX and RX.
4
Link RX LED
Blinking: The device is linked to an Ethernet Switch. / The link between TX and RX is normal.
Off: The device is not linked to an Ethernet Switch. / No link between TX and RX.
5
P1 button
Press and hold this button and then connect the device to power. When the Link TX and Link
RX LEDs start blinking normally, release the button and the device will be reset to factory
defaults.
