27
AUTO LINC UP
6.3 Dialing Fax Calls Manually
If the digital telephone connected to your Linc Up does
not support autodialing, use the following procedure to
dial fax calls manually.
If your fax software supports a manual fax feature, you
can use that procedure instead of the following to dial
fax calls manually. Be sure to take the phone off-hook
and press the manual calibration switch before running
the fax software.
1. Prepare your fax/modem or fax machine for
sending.
2. Lift the telephone handset and listen for a dial
tone. Leave the handset out of the cradle. DO
NOT hang it up, or you will terminate the call.
3. Press the Enter key on your computer keyboard if
you are using a fax/modem. To use the automatic
calibration you must enter the two-second delay in
the fax/modem software.