24
AUTO LINC UP
• The telephone handset is electronically
disconnected when the modem goes off-hook.
You must hang up your modem to restore use
of your telephone handset.
• Some fax software takes a few moments to prepare
a document before dialing. This delay may cause a
dial-tone “timeout” on many telephones. To avoid
the dial-tone timeout, either convert the
document to fax format before you prepare
to send it, or do not lift the handset from the
telephone cradle until the software indicates t
hat it is ready to dial.
6.2 Dialing Data Calls Manually
If the digital telephone connected to your Linc Up does
not support autodialing, use the following procedure to
dial data calls manually.
1. Prepare your computer to autodial a call.
2. If your modem is configured to wait for a dial tone
before dialing, reconfigure the Dial command
ATDT to ATX3DT, where:
• X3 tells your modem to dial without waiting for
a dial tone.
