SW161A Power Switch Maverick 1-Port User Guide
4. From your computer, press <ENTER> until the prompt «>» appears on your screen.
(the Power Switch is now in Command mode and is waiting for commands to switch the
power socket).
5. Press the <TAB> key on your keyboard.
The Configuration menu appears on your screen and the Power Switch is now in
Configuration mode. Follow the menu to configure the Web server of your Power Switch.
All commands start with the slash «/»
(ex.: type the command
/NP
to go to the
N
etwork
P
arameters setting menu.
To display the current menu again, press <ENTER>.
To go to the previous menu and to display it, press <ESC>.
Remark:
to leave the configuration mode, type the restart command
/RS
. This is particularly
important if you want to control the power outlet later through the serial connection.
Power Switch 1 Guard
Version: 1.2.0.2
Commands :
Display
/DS Display Socket State
Control
/SS Switch the socket
Configuration
/NP Network Parameters Setting
/PS Passwords Setting
/NS Device and Socket Name Setting
/SP Socket Parameters Setting
/SU Device Supervision Setting
/IS IP Security Setting
/RS Restart the Device
Enter Selection
>
