22
FIBER OPTIC CONVERTERS I & II
NOTE
Because Switches 3 and 4
control both channels of the
Fiber Optic Converter II, both
channels must be used for
the same purpose. For
example, if Channel 1
connects to a station, then
Channel 2, if used, must also
connect to the station.
5.
Turn off the stations to which
the lobes will attach, and
connect the copper cable
between the stations and the
Converter. Connect the copper
cable between the MAU and its
closest Converter.
6.
Attach the power cords to the
Converters and plug them into
a power source.
7.
Turn on the station or stations.
8.
The installation is complete. See
Chapter 3 for a description of
LED operation.
